Home page

Tips for setting the apex angle of twisted filaments on water jet looms

Release time:

2024-06-28 11:20

Source:

Tips for setting the apex angle of twisted filaments on water jet looms

First, the role of the twist first angle and its lesser degree

Twisted filament advance angle is an important parameter of water jet loom in textile processing, its role is to adjust the upper and lower parts of the loom with each other to control the tightness of the fabric. The twisted wire angle of the first degree of less refers to the actual production, the twisted wire bending degree is small, leading to the twisted wire before a section of the tension increases, affecting the quality of weaving and machine performance.

Second, how to adjust the twisted wire first angle of less degree

1. Adjust the bending degree of twisted wire: Adjust the parameters of each part of the machine to reduce the bending degree of twisted wire, so as to achieve the purpose of reducing the less degree.

2. Enhance the degree of flow of the first section and twisted wire: By enhancing the degree of flow of the first section and twisted wire, the smoothness of the movement of twisted wire will be increased, so as to reduce the curvature of twisted wire.

Precautions

When adjusting the angle of the twisted filament advance, the following points should be noted:

1. Multiple adjustments: It may take several attempts to reach the optimal state during the adjustment process, so it is necessary to be prepared for experiments.

2. Preventing other problems: When adjusting the twisted wire advance angle, it is necessary to prevent other problems, such as insufficient pulling force and uneven thickness.

3. Adjustment records: Records should be made during the adjustment process so as to facilitate the future view of the maintenance work.

Fourth, conclusion

Water jet loom has an important role in textile processing, and twisted filament apex angle is one of the key parameters that need to be taken seriously. This paper introduces the water jet loom to do twisted filament first angle set less and its adjustment method, hope to be able to provide readers with reference to help readers better deal with practical problems in textile processing.

Last page

Layering process for open heald frames on water jet weaving machines

The advantages of water jet loom