Methods for supplementing and replacing yarn on water jet looms
Release time:
2024-05-15 00:00
Source:
1. Supplement of selvage yarn on water jet looms
The replacement method of the tube and the threading method of the edge yarn
1) Press the stop button.
2) Move the spindle spring 1 horizontally and remove it from the tube shaft 2.
3) Remove tube shaft 2.
4) Remove tube 3.
5) Install a new tube.
6) Install the tube shaft 2.
7) Move the spindle spring 1 in the horizontal direction and firmly fix it on the tube shaft 2.
8) Thread the yarn into the guide rod 4, guide wire 5, and guide seat bracket 6 in sequence.
2. Supplement to yarn end treatment of water jet looms
3. Supplement to the yarn feeding body of water jet looms
The replacement method and threading method of yarn end treatment yarn
1) Press the stop button.
2) From the tube seat 2 of the yarn supply frame 1 of the discarded edge yarn, pull out the tube or conical tube that has already used up the yarn end processing yarn.
3) Insert newly prepared bobbin yarn or conical bobbin yarn 3 into the tube seat 1 of the yarn supply frame.
4) Thread the yarn according to the method shown in the left figure.
When one of the yarns on the feeding frame has been used up, a new feeding body should be used to supplement it.
1) Install a new yarn feeding body 2 on the conical creel 1.
2) Connect the front end A of the new yarn feeding body 2 to the knot (tail) B of the used yarn feeding body.
3) Cut the knot and make the length of the knot approximately 3mm.
4) Clamp the connected yarn onto spring tensioner 3
Related news
Layering process for open heald frames on water jet weaving machines
At the same time, it is also necessary to grasp the change rule of the tension and line density of the heald frame, adjust the water spray pressure and heald frame pressure in time, and realize the adjustment and optimization of the quality of the fabric.
Tips for setting the apex angle of twisted filaments on water jet looms
Water jet loom has an important role in textile processing, and twisted filament apex angle is one of the key parameters that need to be taken seriously. This paper introduces the water jet loom to do twisted filament first angle set less and its adjustment method, hope to be able to provide readers with reference to help readers better deal with practical problems in textile processing.
The advantages of water jet loom
High production efficiency: water jet loom in the weaving process can save a lot of water, electricity, gas and other energy, but also can reduce the waste of raw materials, with energy saving and environmental protection advantages.
Characteristics of water jet loom
Water jet loom adopts advanced control system and stability design, which can ensure stable weaving for a long time. At the same time, the water jet loom has stable weaving pattern and small color difference, which can meet the market's high demand for product quality.
Principle and use of water jet loom
Are all the use of its use and maintenance of the important content.
Water jet looms: the industrial "dream loom" for better fabrics!
The yarn cylinder is used to store the yarn, the water jet system is responsible for the water jet, the weaving section is used for fabric production, and the control system is used to control the water jet pressure, speed and other parameters.
Can't find the product you need?
Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry
CONTACT US
Email:
jxjx02@jiangxuanjixie.com
Address: